new file: BME280_with_OLED.ino /first try to play with BME280 sensor and an oled display

master
chweber hace 5 años
padre a08140fb62
commit ebea5823f1

@ -0,0 +1,143 @@
#include <Wire.h>
#include <SPI.h>
#include <stdio.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#define OLED_RESET 4
Adafruit_SSD1306 display(OLED_RESET);
#define BME_SCK 13
#define BME_MISO 12
#define BME_MOSI 11
#define BME_CS 10
#define SEALEVELPRESSURE_HPA (1013.25)
Adafruit_BME280 bme; // I2C
//Adafruit_BME280 bme(BME_CS); // hardware SPI
//Adafruit_BME280 bme(BME_CS, BME_MOSI, BME_MISO, BME_SCK);
void setup() {
int i = 0;
int x_pos = 5;
int y_pos = 10;
Serial.begin(9600);
Serial.println(F("BME280 test"));
display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
display.display();
delay(2000);
display.clearDisplay();
display.drawRect(0,0,128,64,WHITE);
char zeile_1[18] = "Temp [C]:";
char zeile_2[18] = "Druck [hPa]:";
char zeile_3[18] = "Feuchte [%]:";
//Zeile 1 schreiben
while(i<12){
display.drawChar(x_pos,y_pos,zeile_1[i],WHITE,BLACK,1);
display.display();
i++;
x_pos = x_pos + 6;
}
//Zeile 2 schreiben
i = 0;
x_pos = 5;
while(i<12){
y_pos = 20;
display.drawChar(x_pos,y_pos,zeile_2[i],WHITE,BLACK,1);
display.display();
i++;
x_pos = x_pos + 6;
}
// Zeile 3 schreiben
i = 0;
x_pos = 5;
while(i<12){
y_pos = 30;
display.drawChar(x_pos,y_pos,zeile_3[i],WHITE,BLACK,1);
display.display();
i++;
x_pos = x_pos + 6;
}
display.display();
if (!bme.begin()) {
Serial.println("Could not find a valid BME280 sensor, check wiring!");
while (1);
}
}
void loop() {
// Hilfsvariablen für das OLED initialisieren
int i = 0;
int x_pos = 0;
int y_pos = 0;
// Temperatur auslesen und schreiben
i = 0; // Zähler zurücksetzen
x_pos = 90; // X-Position für den Cursor auf dem OLED
char temp_s[5]; // Array für den Temperaturwert zur Ausgabe auf das OLED
dtostrf(bme.readTemperature(), 3, 2, temp_s); // Wert auslesen und in das Array schreiben
// Wert aus dem Array auf das OLED ausgeben
while(i<5){
y_pos = 10;
display.drawChar(x_pos,y_pos,temp_s[i],WHITE,BLACK,1);
display.display();
i++;
x_pos = x_pos + 6;
}
// Druck auslesen und schreiben
i = 0; // Zähler zurücksetzen
x_pos = 78; // X-Position für den Cursor auf dem OLED
float pressure = bme.readPressure() / 100.0F; // Wert auslesen und Dezimalstelle für hPA setzen
char press_s[7]; // Array für den Luftdruck zur Ausgabe auf das OLED
dtostrf(pressure, 3, 2, press_s); // Wert auslesen und in das Array schreiben
// Wert aus dem Array auf das OLED ausgeben
while(i<7){
y_pos = 20;
display.drawChar(x_pos,y_pos,press_s[i],WHITE,BLACK,1);
display.display();
i++;
x_pos = x_pos + 6;
}
// Luftfeuchte auslesen und schreiben
i = 0; // Zähler zurücksetzen
x_pos = 90; // X-Position für den Cursor auf dem OLED
char humi_s[5]; // Array für den Luftdruck zur Ausgabe auf das OLED
dtostrf(bme.readHumidity(), 3, 2, humi_s); // Wert auslesen und in das Array schreiben
// Wert aus dem Array auf das OLED ausgeben
while(i<5){
y_pos = 30;
display.drawChar(x_pos,y_pos,humi_s[i],WHITE,BLACK,1);
display.display();
i++;
x_pos = x_pos + 6;
}
delay(2000);
}
Cargando…
Cancelar
Guardar